EPOXY FLOOR PAINT IRON
- Chống mòn, dễ vệ sinh
- Chống mòn, dễ vệ sinh
- Chống mòn, dễ vệ sinh
Others
BLACK BITUMEN WATERPROOF COATING
Black Bitumen Waterproof Coating is a single component solvent based bitumen polymer liquid membrane. It is cold applied, convenient to use, and delivers effective waterproofing performance.
Key Features
Strong adhesion on concrete surfaces
Excellent waterproofing and vapor barrier performance
Deep penetration into cracks and pores
High elasticity with good surface leveling
Typical Applications
Black Bitumen Waterproof Coating is widely used in various applications:
Waterproof base layer for concrete, mortar, and brick surfaces
Suitable for concrete floors, balconies, drainage channels, basements, fish ponds, and swimming pools
Dip coating for tools such as hammers, shovels, and axes
Shelf life and Storage
Flammable product store in a cool and dry place
Keep away from heat sources, sparks, open flames, and water
Close the container tightly after use
Store and transport carefully to avoid strong impact
All application work must comply with health, safety, and environmental regulations
Shelf life 5 years from the date of manufacture
Surface Preparation
Clean and smooth the surface, ensure it is dry and free from contaminants
Repair cracks, remove loose concrete, and re patch damaged areas
Remove old paint, algae, and mold using scraping tools or high pressure water
Ensure surface moisture content is below 15 percent before application
Application Conditions
Apply in dry weather or indoors
Ambient temperature >15°C
Air humidity <80 %
Surface moisture <15 %
Application Method
Application: Spray, roll, or brush 2 to 3 coats (approximately 0.3 kg per m² per coat), preferably under sunny conditions, drying equipment may be used to accelerate drying
Reinforcement: After the first coat, apply fiberglass mesh to cracks, then proceed with the second coat
Drying Time: Allow approximately 30 minutes between coats
Related Products
ALKYD ENAMEL PAINT
- Excellent adhesion on steel
- Rust-resistant surface protection
- Fast drying for easy application
RED DRAGON 2K PREMIUM ZINC PAINT
- Apply directly, no primer needed
- Hard, durable, glossy finish that does not yellow
- Provides excellent surface protection
SD-11 ALKYD ENAMEL PAINT
- Hard and glossy paint film
- Fast-drying and easy to use
- Long-lasting color and even coverage
BLACK BITUMEN WATERPROOF COATING
- Glossy finish, easy to clean
- Long-lasting gloss retention
- Fast-drying and yellowing-resistant
IRON SUPER COAT INTERIOR PAINT
- Smooth, even matte finish
- Good adhesion and beautiful coverage
- Safe, low-odor formula
ZINC PAINT 1K PREMIUM
- Very high gloss
- Hard and thick coating film
- Fast drying
IRON HEAT RESISTANT SPRAY PAINT
- High heat resistance
- Fast-drying and easy to apply
- Excellent chemical resistance
IRON SHIELD EXTERIOR PAINT
- Strong adhesion, tough and durable
- Flexible and crack-resistant
- Abrasion-resistant and easy to clean
IRON PAINT 1K TOPCOAT
- High coverage
- Long-lasting color
- Easy to use