Surfaces must be clean, dry, and free from contaminants before application Aluminum, iron, carbon steel, stainless steel Surface must be cleaned and roughened manually or mechanically using sandpaper or abrasive pads to improve adhesion Galvanized steel and zinc coated sheets Surface must be clean, dry, and free of zinc salts, follow the same cleaning process as above Previously painted surfaces Clean by sandblasting or high pressure water If damaged coatings cannot be completely removed, sand thoroughly, apply one coat, allow it to dry, then sand again to achieve an optimal surface

Apply in dry weather or indoors Temperature from 5°C to 35°C Humidity from 30 percent to 70 percent

Surface Temperature: 30°C Surface Dry: 5 to 7 minutes Dry to Handle: 60 to 90 minutes Fully Cured: 16 hours