IRON PAINT REMOVER
- Fast Paint Stripping
- Effective Removal of Stubborn Paint Films
- Clean Substrate for Easy Recoating
Others
2K AUTOCLEAR 555 CLEAR COAT
2K Autoclear 555 Clear Coat is a two component solvent based clear coating system. It is formulated from high quality non yellowing polyol resin combined with polyisocyanate, solvents, and specialized additives. The coating cures under ambient conditions through a chemical reaction, delivering a premium finish with superior aesthetics.
Key Features
Fast-drying, with strong hardness and adhesion.
High gloss and good leveling.
Easy to use and clean.
Aesthetic finish with UV resistance.
Non-yellowing paint film
Typical Applications
Premium topcoat for industrial machinery and equipment.
Protects and enhances stone, faux stone, ceramic, and decorative surfaces.
Gloss coating for cars, motorcycles, boats, and more
Shelf life and Storage
Flammable product. Store in a cool, dry place away from heat, ignition sources, and water. Close tightly after use.
All application work must follow health, safety, and environmental standards.
Shelf life: 18 months from the manufacturing date
Surface Preparation
Surfaces must be clean, dry, and free from contaminants before application
Aluminum, iron, carbon steel, stainless steel
Surface must be cleaned and roughened manually or mechanically using sandpaper or abrasive pads to improve adhesion
Galvanized steel and zinc coated sheets
Surface must be clean, dry, and free of zinc salts, follow the same cleaning process as above
Previously painted surfaces
Clean by sandblasting or high pressure water
If damaged coatings cannot be completely removed, sand thoroughly, apply one coat, allow it to dry, then sand again to achieve an optimal surface
Application Conditions
Apply in dry weather or indoors
Temperature >15°C
Humidity < 80%
Application Method
Coating system: Two-component
Mixing ratio (paint – curing agent – thinner): 4 – 1 – 1
Thinner: Red Dragon lacquer thinner
Application tools: Spray gun, roller, brush
Related Products
IRON HEAT RESISTANT SPRAY PAINT
- High Heat Resistance
- Ease of Application
- Excellent Chemical Resistance
IRON SUPER COAT INTERIOR PAINT
- Smooth Matte and Uniform Finish
- Excellent Adhesion and Coverage
- Safety and Low Odor
IRON SHIELD EXTERIOR PAINT
- Adhesion and Hardness
- Flexibility
- Wear Resistance and Cleanability
SD-11 ALKYD ENAMEL PAINT
- Hard and Glossy Finish
- Fast Drying and Ease of Use
- Excellent Color Retention and Even Leveling
BLACK BITUMEN WATERPROOF COATING
- High Gloss and Cleanability
- Excellent Gloss Retention
- Fast Drying and Non-Yellowing
RUSTOPPER ANTI RUST PRIMER
- Durable Adhesion to Iron and Steel
- Anti-Rust Surface Protection
- Fast Drying and Ease of Use
BLACK BITUMEN WATERPROOF COATING
- Strong Adhesion to Concrete
- High-Performance Waterproofing
- High Elasticity and Even Coverage
ALKYD ENAMEL PAINT
- Excellent Adhesion to Iron and Steel
- Excellent Rust Prevention
- Fast Drying and Ease of Application
ZINC PAINT 1K PREMIUM
- Ultra-High Gloss
- High Build and Hardness
- Fast Drying